Sprayer and Farm Equipment Cleaning, Ultrasonic

The Contamination Problem

What we remove in agriculture & agri-processing

Agrichemical residues

Herbicide and pesticide films through sprayer systems — carryover risk to the next application.

Organic fouling

Plant material, sap and soil bonded onto working components.

Fats & product residues

Through processing and rendering hardware.

Scale & bore water deposits

In spray and processing water circuits.

Grease & fuel films

Standard driveline soils across seasonal equipment.

The endpoint is a defined, repeatable process condition — cycle time, chemistry, concentration, frequency and temperature are recorded parameters, not operator judgement.

Components We Clean

Real parts, real materials

Spraying systems

Nozzles, valves, manifolds, filters — residue out of every passage before the next chemical goes through.

NozzlesValvesManifolds

Harvest & driveline

Header, harvester and driveline components on seasonal rebuild.

Header partsDrivesBearings

Processing

Milling, pressing and rendering hardware to hygiene standard.

Mill partsPress hardwareScreens

Why Ultrasonics — And Why These Machines

Cavitation cleans geometry it cannot see

Bubble collapse at the liquid–metal boundary lifts contamination from passages, galleries and cavities without anything touching the surface. Nothing abrades, nothing embeds, no metal is removed.

GeneratorResonance held all shift

The VarioSonic G4 tracks the transducer array as temperature and load shift — conversion efficiency up to 95%.

Sound fieldSweep modulation

Eliminates standing-wave hot and cold zones across a loaded basket.

Process controlLogged, recipe-driven cycles

Stored recipes and logged cycles — audit evidence produced as a by-product of running.

Bath conditionFiltration & oil separation

Multi-stage filtration and weir oil capture hold results steady as the bath loads.

SupportOver-the-air diagnostics

Most faults identified — many resolved — without a site visit.

ConstructionBuilt to work hard

Heavy 316 stainless tanks, tested before despatch, every wearing part replaceable.

Equipment Fit

The machine follows the process

From manually loaded single-tank units to automated lines — and engineered systems where the catalogue ends.

Powersonic

Bench units for nozzle and valve service.

Explore the range →

MSX

Workshop platforms for seasonal overhaul.

Explore the range →

Applications Matrix

Component coverage at a glance

Component category	Specific parts / assemblies	Compatible materials
Spraying	Nozzles, valves, filters	Stainless, brass, polymers
Harvest	Header and driveline parts	Steels
Processing	Mill, press, screen hardware	Stainless
Irrigation	Valves, fittings, meters	Brass, polymers
Livestock	Feeding and dairy hardware	Stainless

What are you cleaning?

Tell us what the part is, what comes off it, and what it has to pass. Technical sales will tell you whether ultrasonics is the right answer for that part and what it takes to run it on your own floor.

Talk to an engineer

FAQ

What agriculture engineers ask us

Can sprayer carryover be eliminated?

Cavitation cleans passages triple-rinsing never reaches — residue testing confirms the endpoint.

Is seasonal batch cleaning practical?

Yes — basket loads through a workshop unit turn a rebuild backlog into days.

What about polymer components?

Chemistry and temperature are selected for the material set — confirmed by trial.

Processing hygiene documentation?

Logged cycles document the cleaning step for your hygiene plan.