A degreaser bucket and a toothbrush gets a cassette maybe 70% clean. A benchtop ultrasonic gets the chain, cassette and rings factory-clean in fifteen minutes — and does your carby, injectors and restoration parts on the weekend they need it.
Chain, cassette and chainrings in the basket, hot degreaser, 10–15 minutes: wax-ready, watt-saving clean — including the rollers and link internals no brush enters. Waxers: this is the prep the wax instructions assume.
A gummed mower carby, motorcycle carbs off a winter project, a set of injectors — stripped, basketed and cleaned through the drillings, at home, without the workshop bill. For weekly trade volume, that is MSX territory — this is the home tool.
Vintage hardware, model engines, printer parts, tools, hardware by the tray — the machine cleans while you get on with the build.
Rinse the chemistry off, inhibitor on bare steel (it flash rusts the same day), dry, reassemble.
Drivetrain friction is real watts and real wear — a properly clean chain runs quieter, shifts crisper and lasts longer, and wax adhesion depends on it.
Carby jets, chain rollers, injector galleries — cavitation cleans the internals that define whether the thing actually works afterwards.
The same machine serves the bikes, the mower, the project car parts and the 3D-printer plates. Few tools in the shed earn their bench space harder.
The home default: full cassette + chain in one cycle, single carby with room to spare — $2,348.50 inc GST.
View or buy →
The big shed: motorcycle carb banks, long parts, batch trays in the 440 mm tank — $3,074.50 inc GST.
View or buy →Chains-and-cassettes only? The PS 605's deep tank at $1,985.50 is the compact option.
| Chemistry | FX Degreaser at 5% for drivetrains and oily parts |
| Temperature | 50–65 °C |
| Power | Medium–High |
| Time | 10–15 minutes |
| Then | Rinse · anti-rust on bare steel · dry |
Starting points only — part condition, chemistry and load set the final card. We help you dial it in.
Running a workshop rather than a home bench? See the ultrasonic parts cleaner range.
Tell us what the part is, what comes off it, and what it has to pass. Technical sales will tell you whether ultrasonics is the right answer for that part and what it takes to run it on your own floor.